Incubators with carbon dioxide Memmert, INCO2 series
The incubators with carbon dioxide Memmert are situated in the professional field. By means of the control with microprocessor there can be adjusted digitally the temperature, the carbon dioxide content and the humidity.
The equipment is made from stainless steel both outside and inside. In interior there are not sharp corners and from this reason it is easy to be cleaned. The thermostatic heating is situated in the four lateral walls. In the back door and on the back wall it is separate heating that has the role of preventing the condensation of water vapors. The incubator has the inside door from glass, so there can be supervised the tests without influencing thermostatic process. Gas internal circulation is without disturbancesDemand offer
The equipment is made from stainless steel both outside and inside. In interior there are not sharp corners and from this reason it is easy to be cleaned. The thermostatic heating is situated in the four lateral walls. In the back door and on the back wall it is separate heating that has the role of preventing the condensation of water vapors. The incubator has the inside door from glass, so there can be supervised the tests without influencing thermostatic process. Gas internal circulation is without disturbancesDemand offer
Thermostating
Because of the control with microprocessor temperature can be set between the room temperature and 45 degrees Celsius with levels of 0.1 degrees Celsius. The homogeneity of temperature is of +-0.5 degrees Celsius its variation in time is of +- 0.1 degrees Celsius.
A special characteristic of equipment is the possibility of starting a cycle of sterilizing, with this it is obtained a temperature of inside and of the parts in touch with this of 160 degrees Celsius.
Gas system
The content of carbon dioxide can be set between 0-20% and it is controlled and adjusted by a sensor IR. The precision is of +- 0.1%Demand offer
A special characteristic of equipment is the possibility of starting a cycle of sterilizing, with this it is obtained a temperature of inside and of the parts in touch with this of 160 degrees Celsius.
Gas system
The content of carbon dioxide can be set between 0-20% and it is controlled and adjusted by a sensor IR. The precision is of +- 0.1%Demand offer
The system of humidity adjusting
The humidity is adjusted and is displayed digitally in the domain 88-97% rH. Like any programming equipment Memmert and the incubator with carbon dioxide is programming at highest level, either using the switch SET, the rotating switches and the digital on the equipment either by means of computer.
The packet software Celsius 2000 is a standard accessory and assures the programming of all functional parameters and the continuous recording of dates. The equipment is endowed with digital protection at overheating and alarm functions for the other parameters (carbon dioxide, humidity).
All these assure first the test’s protection, so digital protection at overheating, which is a second thermostat. While temperature exceeds the set value, this takes over the equipment control and continues thermo stating.Demand offer
The packet software Celsius 2000 is a standard accessory and assures the programming of all functional parameters and the continuous recording of dates. The equipment is endowed with digital protection at overheating and alarm functions for the other parameters (carbon dioxide, humidity).
All these assure first the test’s protection, so digital protection at overheating, which is a second thermostat. While temperature exceeds the set value, this takes over the equipment control and continues thermo stating.Demand offer